V belt
A V-belt is the most common type of drive belt used to transmit power, and its main function is to transfer energy from a primary source, such as an engine, to a secondary drive unit.
offers the best combination of traction, speed transmission, load distribution and long life, and its cross-section is trapezoidal or V-shaped.
In this type of track belt, it is placed in a groove in a similar shape on a pulley or tape, and by increasing the load and creating force and torque distribution, the V-Belt belt sinks into the groove and is usually made of rubber or polymer, or it may be Fibers are embedded for more strength and reinforcement. V-belts may be toothed or non-toothed.
Gears provide more flexibility when used with small diameter pulleys or bending pulleys, and gear arrangements can be equally spaced, perpendicular, or angled.
Also, belt is simple and cheap to use and does not require lubrication. This belt is so widely available that in many cases all you need is two pulleys and a belt.
Of course, belts generally come in two categories: envelope (wrapped) and raw edge, which envelope belts, also known as wrapped, have a fabric cover and are molded into a V-shape. Complex belts have a higher resistance to oils and extreme temperatures.
They can be used as a friction clutch during startup. Raw edge V-belts are uncoated, dried and then V-cut, and the raw edge type is more efficient, produces less heat, and provides the right diameter for smaller pulleys. This type of V-belt increases strength and provides longer life.
A V-Belt will fail under too much load (either by slipping or breaking) and that can seem like a bad thing, but in many cases it’s a very good thing. Because it prevents engine failure and you will not be charged more.
In fact, a V-belt can act as a fuse, and a broken part is safely and easily replaceable, preventing damage elsewhere, and of course its safety here requires that it be lost. The sudden application of drive torque does not create unsafe conditions.
straps only stretch and slip a little, which gives us some nice features. One of these helps to reduce the transfer of shock loads through the system, when the load jumps the belt stretches a little and slips a little on the pulley and the V-Belt belt tension and slip means you can run multiple belts. Place them in parallel and expect them to share the load equally.
Of course, if you need twice the power transfer and don’t want to use a larger belt, you’ll be able to use two small that if one begins to carry more load than the other, until Both are evenly loaded, it slips slightly.
This may seem obvious, but in a more robust drive system such as a timing belt, roller chain, gearbox, etc., there is no guarantee that multiple elements will share the pressure equally.
These very characteristics of V-belts mean that this type is not suitable for every application, and the fact that the belts slip a little means that a drive is not synchronized, as you cannot run two shafts at the same time. Connect and two identical pulleys together and make them work in harmony.
For this reason, you won’t see belt in precision motion applications where it’s important that X number of revolutions of your drive motor exactly match Y inches of travel.
If you are familiar with cars, think about the difference between fan belt and timing belt. The fan belt turns a lot of accessories, but the alternator turns a little differently than the power steering pump and compressor, so a V-belt works great, and your timing belt can turn your camshafts over millions of revolutions, in exact sync with Hold the crank.
Also, the is much more limited in terms of torque and speed than other belts and cannot move too fast or too slow.
V-shaped straps
Belts are closed circuits that are used in machines of various industries, such as (machinery-agriculture-textile-spinning-weaving-tile and ceramic-cement). The characteristics of this belt are many, but we will mention some of them below.
Good heat resistance (-30 degrees to 70 degrees)
Oil resistant
High efficiency in power transmission
Catching vibrations and vibrations between money and mobile.
From other types of V-shaped belts, V-shaped belts have a longer useful life due to their high flexibility and proper placement in the Foley groove, as well as generating less heat during operation.
V-shaped belt
A V-shaped belt can be used to transfer rotational force from one place to another. The reason for naming the V-shaped belt is that its cross-section is V-shaped. The V-shaped belt usually consists of different parts, in this part we will mention a few of them for your familiarity.
Foblade wires are one of the components used in the V-shaped belt. The wire in the V-shaped belt provides the necessary force to transmit the torque for the belt.
The base rubber compounds are another part of the V-shaped belt that absorb shock and vibration during power transmission and somehow reduce noise and vibration to some extent. The cover or protective cover is another part of the V-shaped belt, which prevents the belt from getting damaged due to the heat caused by movement.
V-shaped belts have 5 classification models, which are determined based on the V-shaped cross section and the amount of power they must transmit.
In cases where more power needs to be transferred, it is better to use a double V-shaped V-belt and also transfer more torque.
You can find out its type by using the specifications written on the desired belt, as it is a V-shaped belt with C200 written on it, it means that its class is C type and also The number 200 indicates the nominal length inside the belt.
The V-shaped belt transmits less torque with less width and also causes less tension.
The V-shaped belt can be used in cases where the belt has less contact with the pulley. These types of belts can be used in the speed range of 5 to 30 meters per second. These types of belts are produced in the form of a mold and are also resistant to heat and anti-static.
This type of belt is resistant to length changes, so several belts can work side by side. This type of belt is used in industrial and agricultural machinery.
Padded
The application and use of conveyor belts in parent industries such as cement, gypsum, mines and similar industries is very necessary for the movement of materials, so today conveyor belts have become an integral part of the production and sale cycle of belt products and load transfer in the country. It can be said that all the country’s rubber and belt products, such as covered V-shaped belts, are produced in the country and reach our dear customers.
According to what has been said above about coated V-shaped belt, there are different types of conveyor belts produced in the country, which are produced by the capable hands of the zealous Iranian youth. Coated V-shaped belt is used in various industries.
This means that coated V-shaped belts should be taken seriously because they have many customers, so it can be said that the production and sale of coated V-shaped belts is one of the ways through which you can make a good profit. See the production of coated V-shaped belt inside our site.
Selling and sending coated V-shaped belt requires a special and complex technology, in addition to that, to produce and sell coated V-shaped belt, you must also have the production material of coated V-shaped belt, as the name of coated V-shaped belt shows. It is known that the production of these conveyor belts has special applications in the mining and cement industries.
Also, the production design of coated V-shaped belt has been done in a more special way than other conveyor belts in the market. You can see the pictures related to the types of coated V-shaped belt on our site, made of thick and strong rubber for production. Various types of conveyor belts are used, including coated V-shaped belts, because the applications of coated V-shaped belts are very heavy.